kk1

PROGRAMMED KK 5.5 V2.3 MULTICOPTOR BOARD AND USB FLASHWARE

Rs.1,500.00

Availability: Out of Stock

Category: .
Features ::

Simple structure, Easy to Maintain and Debug Control

Relying on potentiometer adjust gyro sensitivity.

Full servo signal output, support normal ESC / analog servo

Support for single-axis / Y3 3-axis, Y4-type 3-axis, 4 axis, 6 axis, V22 flight mode

Supports 4-axis “+” and “X” flight mode, support for six-axis “HEXA6” and “Y6” flight mode

Description ::

This is the latest v.5.5 KK multicontroller that has been Programmed at the factory for the beginners. It uses Murata Piezoelectric Gyros which have been incorporated into the board design for robustness. The Yaw gyro assembly is also slot mounted for extra robustness. These gyros have proven to be the most vibration resistant of all the gyros we have tested so far. The board comes in black with blue LED and has an on board In System Programming (ISP) header to enable easy firmware updates. The on board Atmega168 chip gives users the extra space to load expanded firmware with higher refresh rates to enhance stability. The boards features include:

Product Description

Features ::

Simple structure, Easy to Maintain and Debug Control

Relying on potentiometer adjust gyro sensitivity.

Full servo signal output, support normal ESC / analog servo

Support for single-axis / Y3 3-axis, Y4-type 3-axis, 4 axis, 6 axis, V22 flight mode

Supports 4-axis “+” and “X” flight mode, support for six-axis “HEXA6” and “Y6” flight mode

Description ::

This is the latest v.5.5 KK multicontroller that has been Programmed at the factory for the beginners. It uses Murata Piezoelectric Gyros which have been incorporated into the board design for robustness. The Yaw gyro assembly is also slot mounted for extra robustness. These gyros have proven to be the most vibration resistant of all the gyros we have tested so far. The board comes in black with blue LED and has an on board In System Programming (ISP) header to enable easy firmware updates. The on board Atmega168 chip gives users the extra space to load expanded firmware with higher refresh rates to enhance stability. The boards features include:

Reviews

There are no reviews yet.

Be the first to review “PROGRAMMED KK 5.5 V2.3 MULTICOPTOR BOARD AND USB FLASHWARE”